SI-TEX AIS Radar Receiver
NEW AIS RADAR RECEIVER DISPLAYS AIS TARGET DATA
The new SI-TEX AIS Radar receives VHF transmissions from vessels carrying AIS transponders to display target data on radar like display. Dual-frequency AIS receiver demodulator, signal processor and 5" monochrome matrix display are housed in compact unit.
Multi-function keys enable easy navigation through the menus. Any vessel on the screen can be selected to display vessel's MMSI number, name, course over ground, speed over ground, range, and Lat/Lon. Each vessel leaves a trail of previous positions so the user can instantly see its relative position and bearing. Each vessels status is shown by a different symbol so the user can see if a vessel is underway, at anchor, fishing etc. This information is sent continuously and is useful in navigating, traffic monitoring and collision prevention.
Receives NMEA input (RMC) from the vessels GPS which puts the user at the center of radar style screen. All other AIS carrying vessels are displayed with bearing and range relative to the user. Zoom feature allows 6 ranges to be selected from 1NM up to 32NM. An alarm can be selected to give an audible warning if a vessel enters a preset range ring.
Any vessel on the screen can be selected to display vessel's MMSI number, name, course over ground, speed over ground, range, latitude and longitude.
Each vessels status is independently labeled so the user can see if a vessel is underway, at anchor, fishing etc. This information is sent continuously and is useful in navigating, traffic monitoring and collision prevention.
Receives NMEA input (RMC) from the vessels GPS which puts the user at the center screen. All other AIS carrying vessels are displayed with bearing and range relative to the user.
Zoom feature allows 6 ranges to be selected from 1, 2, 4, 8, 16 and 32 NM.
An alarm can be selected to give an audible warning if a vessel enters a preset range ring.
161.975 and 162.02 MHz operation.
Easy to install, requires optional standard marine VHF antenna and GPS input.
It is a receive only unit and designed for voluntary fittings on recreational vessels and light commercial vessels not needing the mandated class "A" AIS units.
Case Size: 6"W x 4 1/2"H x 1 5/8"D.
|
